DINUOE-4015 General Electric Anti Corrosion Coating

1、 Product performance:

Transparent beige color, engine protection, high temperature resistance, high adhesion, long-term/permanent.

2、 Application scope:

DINUOE-4015 leaves a hard, transparent film that can resist alkali and acid.

DINUOE-4015 has a heat resistance of 200 ° C.

DINUOE-4015 has a non stick and clean film that facilitates visual inspection of metal surfaces, reading of labels and numbers, etc. The adhesion and flexibility of rubber and plastic parts are good at both low and high temperatures. Suitable parts treated with 4010 are the engine compartment, engine, and other parts that must withstand high temperatures.

3、 Technical features:

1. Color: Transparent beige

2. Membrane type: Hard, waxy

3. Density at 23 ° C: 890 kg/m ³

4. Viscosity at 23 ° C, DIN 4：25s

5. Dry matter content: 47% by weight

6. Aromatic content in solvent: 5%

7. Recommended wet film thickness: 120 μ m

8. Rec film thickness: 40 μ m

9. Drying time: Wet at 120 microns, optimal ventilation for 1 hour; Wet at 120 microns, room temperature at 23 ° C, relative humidity at 50% for 4-6 hours

10. Low temperature adhesion: -30 ° C

11. Impact on car paint: None

12. Chemical resistance: 10% hydrochloric acid, sulfuric acid, and formic acid

13. Removable within three months: hydrocarbon solvents

14. Heat resistance: 200 ° C

15. Salt spray test (dried at 80 ° C for 24 hours): 40 micron dry for 240 hours, 80 micron dry for 500 hours